FAQ About Outrigger Crane Pads

CEXC  > Ground mat, Steel crane mat >  FAQ About Outrigger Crane Pads

FAQ About Outrigger Crane Pads

0 Comments

Crane outrigger pads

Did you know that between 1997 and 2006, there were approximately 82 crane-related fatalities a year? Operating heavy machinery like cranes can be incredibly dangerous; however, with the right tools and safety measures, injuries and deaths can be easily avoided.

OSHA states that cranes must be assembled on firm ground that has been sufficiently drained and graded in conjunction with supporting materials and tools such as ground mats, cribbing, and blocking to provide adequate support.

When it comes to choosing outrigger crane pads, three factors must be considered: the ground conditions upon which the crane will sit, the size of the outrigger foot, and the load of the equipment.

FAQ About Outrigger Crane Pads

  1. How do ground conditions affect the outrigger pads?
    It should go without saying that the ground conditions play a big part in the stability of the crane. If the ground is wet, you risk sinking. Thus, crane pads should always be set up on ground that is compact and level. Always determine ahead of time any subterranean hazards that might pose a risk to your operation and affect pad placement.
  2. What is the significance of the size of the outrigger foot?
    The general rule of thumb is to use an outrigger pad that is at least three times the size of the foot.
  3. What is the significance of the outrigger load?
    The purpose of an outrigger pad is to evenly distribute the weight of the load over a wide area so that it can safely support the equipment. The best crane pad is sturdy enough to bear the weight of the outrigger load while also being light enough to provide some cushioning and make transportation go smoothly.
  4. What should I look for when inspecting outrigger crane pads?
    First make sure that it is clear of debris and is perfectly smooth. It must be smooth in order to maintain solid contact with the crane pad. There cannot be any sign of cracking or warping.

Safety is essential when working with cranes. If you have any additional questions regarding equipment please feel free to post in the comments section below.

Leave a Reply

Your email address will not be published. Required fields are marked *